Used LITZ T500 Drilling and tapping center

Integral box type bed body rigidity is to ensure that the machine does not deform the basis of low center of gravity (the overall machine design center of gravity 600mm high), so that the machine tool in the machining process amplitude is small, not easy to be resonated; large span pivot (four pivot distance of 1200mm 840mm) to ensure that the machine tool by the impact of the workpiece to occur center of gravity shift without generating the center of gravity of the bed body a large distance of the shift. In order to prevent the superposition of different self-excited frequency and vibration of the excitation frequency, so the design of unequal spacing mesh staggered bars to avoid the same amplitude. x/y/z feed axis (60m/min) optimization is to cooperate with the HRV control technology, the transformation of the method of improving dynamic performance, the use of increasing the ratio to improve the dynamic characteristics of the feed axis of the method is applicable to high-speed mobile machine tools, the servomotor output speed does not reach the rated speed of the situation, by increasing the ratio can be improved. In the case that the servo motor output speed does not reach the rated speed, the matching performance can be improved by increasing the transmission ratio. All three axes adopt imported precision grade ball screws, precision grade linear guide rails and P4 grade angular contact bearings.

 We also have Other Brands of T-500, such as: Used JIRFINE Machining Centers, Used FANUC Machining Centers, Used YCM Machining Centers, Used TAIZ Machining Centers and so on, we have good products and professional team, the company grows rapidly, we provide customers with good products, good technical support, sound after-sales service.